Incidently, back when I first fixed my Star Wars (and AR2) I posted that
my card interconnect board (the thing between the wire harness and the
game boards) didn't deliver both +5v lines to the board. No one answered
back that this was common or a fluke, but anyone with a SW might want to
check this, if they haven't. I put a jumper wire through the via hole, so
both +5 lines are now in use.
Other than twice the current capacity, you now won't blow your AR2 if one
of the pins stops making contact.
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue May 29 12:17:28 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:19 EDT