RE: Major Havoc/Tempest spinner problems

From: <galaga_at_zfree.co.nz>
Date: Tue Jun 26 2001 - 03:18:11 EDT

i fix my tempest by pulling apart the opto in to 5 bits
2 leds ect..
there where the same as in an a500 mouse!!! so i just used the mouse's leds
and put it back togeter and it work!!! easy as

>Doug J. wrote:
>
>>BTW, anyone got a source on Optek OBP2216 optos? (i.e. the "curved"
>>kind that I have on my Tempest wheel? The "normal" ones won't fit
>>in the PCB mounting holes used by the "curved" ones.)
>
> I called Optek about these a long time ago (late 80's) and they
>told me that the part was made exclusively for Atari. IIRC, you
>can repair them by removing the offending transmitter or receiver
>from the housing and replacing it with a new device. I got the IR
>transmitter from another Optek part that we had available where I
>worked at the time. I'm fairly certain that they just snapped into
>the curved housing, they weren't molded or sealed. I had to do this
>with my Tempest spinner once. YMMV.
>
>David Fish "We want...Information. INFORMATION
>Melrose, MA USA You won't get it!
> dfish1.at.mediaone.net By hook or by crook we will"
> David.Fish.at.axcelis.com _The Prisoner_
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>
>

__________________________________________________
Advertise with ZFREE - to find out more click below
http://www.zfree.co.nz/about-us/advert.html
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Jun 26 03:44:37 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:48 EDT