Re: WG6101 HV Transformer

After digging through a bunch that had the stickers vaporized, here is what I found.

Small sqaurish sticker on the transformer with a logo that appears to be a "C" with a smaller letter "M" inside of the open parts of the "C". Sticker reads..."1X08" "MSH1RAD17" "53X0487-1"

I have pictures of this sticker, along with a picture of a complete HVT assembly (with focus/screen voltage knobs, etc.) if anybody can use them. Unfortunately the pictures of the sticker came out poorly
- I had to turn off the flash to keep it from washing out the lettering, and wasn't able to get a very clear pic.

Richard

Rodger Boots wrote:

> Are there any numbers on the flyback? I might be able to cross reference it.
>
> Travis Shire wrote:
>
> > Ok..here we go....
> > The HV transformer in my newly aquired Tempest has gone south and I am looking for a replacement. Anyone have one to spare?
> > Also I would like to know who the oem was for this unit to get specs and possibly have some repro'd.
> > I have sent an email to Jeff Gardner to see if there is anything he can tell me. I will inform the list if WG can tell us something we don't already know (yea...I know, I hear you snickering).
> >
> > Also...I have a Tempest boardset where the pix is "keystoned" on the top and bottom (or sides if the monitor is positioned horizontally). Pwr supply rails and op amps are ok. Anyone seen this before?
> >
> > Thanks all
> > Boardjunkie
> >
> > --
> >
> > _______________________________________________
> > FREE Personalized E-mail at Mail.com
> > http://www.mail.com/?sr=signup
> >
> > Talk More, Pay Less with Net2Phone Direct(R), up to 1500 minutes free!
> > http://www.net2phone.com/cgi-bin/link.cgi?143
> >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Aug 24 18:53:38 2001