Re: Wintron install: Does this look right?

From: Marc Alexander <marc_at_wolfems.com.au>
Date: Tue Oct 23 2001 - 09:59:01 EDT

I must do the same thing myself one day, and have saved these
pictures for reference, can you please let us know if it works ok
when you power it up?
I have called the pictures 'correct install..' so must make
sure that in a year or whatever when I use them that they are right ;-)

thanks,
Marc

----- Original Message -----
From: "Dan Rasmussen" <sscanf@yahoo.com>
To: <vectorlist@synthcom.com>
Sent: Tuesday, October 23, 2001 11:06 PM
Subject: VECTOR: Wintron install: Does this look right?

> Hi,
>
> Last night I finally got around to working on my Start Wars
> after having a Wintron HV unit sitting on my bench for 2+
> years. I downloaded the Amplifone FAQ and the corrected
> Wintron install instructions (thanks to those who put in
> the effort). My only problem is that the section of the
> Amplifone FAQ where it describes how to install the Wintron
> HV has an error.
>
> It explains that there are connectors (as you look at the
> solder side of the board) at 7:00, 8:00, 11:00, 1:00, 2:00,
> 4:00, and 5:00 ... but then it tells you to connect the
> green wire at 9:00. I was looking at the FAQ posted at :
>
> http://www.gamearchive.com/video/manufacturer/atari/vector/monitors/Amplifone/amp_hv_faq.html
>
> After reading through it a few times and looking at the
> "corrected" Wintron instructions, I hooked green up at
> 11:00. I was also not sure how to orient the new HV uint
> as it takes up quite a bit of RE on the board.
>
> Please take a look at some pics I took and let me know if I
> got this thing right (warning, long URL that might get
> split by your mailer):
>
>
http://photos.yahoo.com/bc/drasmuss/lst?&.dir=/amplifone&.src=ph&.view=t&.begin=1&.order=&.done=http%3a//photos.yahoo.com/bc/drasmus
s/lst%3f%26.dir=/amplifone%26.src=ph%26.view=t
>
> Thanks very much.
>
> Dan Rasmussen
>
> PS Joel, those new thumb buttons are going in this week
> too.
>
>
> =====
> ------ replies to sscanf@yahoo.com ------
>
> Anything that appears after this sentence is inserted by
> Yahoo (or others) and may not be a good idea.
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Oct 23 07:09:34 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:44 EDT