Asteroids monitors G05-801 / G05-802 and 19V2000 - ADAPTOR WANTED

Thanks, I've read the relevant bit of the FAQ!

Now does anyone have one of the Atari Adaptor Harnesses available for sale /
trade / loan (to copy)?

Anyone, please??

Cheers,

Steve

-----Original Message-----
From: owner-vectorlist@synthcom.com
[mailto:owner-vectorlist@synthcom.com]On Behalf Of tom mcclintock
Sent: 08 March 2002 17:33
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Asteroids monitors G05-801 / G05-802 and 19V2000

Yeah, what Mark said :)

Atari made an adapter harness that would allow you to plug a G05-802
monitor into a Lunar Lander or early Asteroids cabinet. I would suggest
reading through that mediocre G05 FAQ.

http://www.ionpool.net/arcade/tech/bw_vector_monitor_faq.pdf

tm

Mark E Davidson wrote:
>
> If memory serves me, The G05 1 is not pined the same as the latter
> G05's. I remember having to make an adapter for my Lunner lander to
> replace the old G05 with the newer version
>
> I thing the older go5-1 uses .156 straight pins where the g05-2 used the
> molex connector similar to the WG monitors
>
> -=Mark=-
>
> Steve Coule wrote:
>
> > Are these monitors all plug compatible? I have an early asteroids with
a
> > g05-801, can I plug a 19V2000 straight in? or a G05-802 for that
matter?
> >
> > Thanks,
> >
> > Steve
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
> >
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Mar 8 11:02:37 2002