Re: Star Wars control panel overlay

Is berg manufacturing online?

>From: "Tim Tewalt" <tim@srccomp.com>
>Reply-To: vectorlist@synthcom.com
>To: <vectorlist@synthcom.com>
>Subject: Re: VECTOR: Star Wars control panel overlay
>Date: Wed, 13 Mar 2002 14:02:09 -0700
>
>I cross-referenced one from Berg a while back. Here's a
>couple clips from old emails:
>
> >> Sure, no problem. Looks like the gear is a 24 pitch,
> >> 14 tooth gear with a .250 inch bore and .250 inch face.
> >>
> >> I'm pretty sure I found the part in a Berg Manufacturing
> >> catalog. If so, the part number is P24A66-14.
>
> > I got the gear from Berg last week and got it installed. It
> > is a perfect replacement and works great!!!! Thanks again for
> > all of your help. May the Force Be With You!
>
>Crud... this is the small gear, isn't it?
>
>Tim
>
>----- Original Message -----
>From: "Christopher X. Candreva" <chris@westnet.com>
>To: <vectorlist@synthcom.com>
>Sent: Wednesday, March 13, 2002 1:34 PM
>Subject: RE: VECTOR: Star Wars control panel overlay
>
>
> > On Wed, 13 Mar 2002, Bret Pehrson wrote:
> >
> > > I've been casually looking into having these gears reproduced.
> >
> > Are they really custom gears ? No chance they are available as a
>standard
> > part from someplace like http://www.smallparts.com/ or
> > http://www.nordex.com/
> >
> > ==========================================================
> > Chris Candreva -- chris@westnet.com -- (914) 967-7816
> > WestNet Internet Services of Westchester
> > http://www.westnet.com/
> >
> >
>--------------------------------------------------------------------------
>-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Mar 13 13:17:36 2002