Re: Re: Bulk buy on Wintron flybacks

I can order a prepaid order, but the last bulk pricing I got was in 1996:
  1 unit @ $156.14
10 pieces @ $147.62
25 pieces @ $135.32
50 pieces @ $124.91
100 pieces @ $119.40

The 50 lot looks like the most cost effective. I would have to charge about
10 - 15% to cover my costs of customs clearance and staff time handling the
orders.

If you are talking 50 units it might be better for someone in the US with a
company order them to avoid the customs costs...

          Don't have a whole bunch of people ask Wintron for current
pricing, it would be better for the group to co-ordinate ONE person to
contact them and handle everything, otherwise the nuisance factor of twenty
people all calling for bulk order might make them not want to be reasonable
about it...Whoever does order should also find out if Wintron has a
warranty on the transformers...

John :-#)#

At 03:23 PM 11/04/2002 -0400, big dog wrote:
>Hi,
>
>I have heard folks in here talk about doing a bulk buy on these so many times
>but I have never seen anything become of it. I think I read a post where John
>Robertson was willing to do it if he could get some folks to prepay. I
>can use
>4 -5 of these so Im very interested. Lets get this thing going .......who all
>would be willing to do it?
>
>Mark Capps
>
>Michael Thomas wrote:
>
> > Yes Joe, it is a ground. As a matter of fact it is the center tap to the
> > 3-wire monitor power connection! I'm amazed anyone would cut this wire.
> > That gray wire goes to pin 14 on the monitor's 15-pin main input connector
> > (J100). It's the pin between the two violet wires on one end of the
> > connector. After passing through the connector, it veers off with the two
> > 25 volt power wires. It is also the center pin on this 3-pin connector.
> > Once again, you would absolutely want to rework this one.
> >
> > Michael
> >
> > ----- Original Message -----
> > From: "Joe Bachmann" <joe.bachmann@newmail.net>
> > To: <vectorlist@synthcom.com>
> > Sent: Wednesday, April 10, 2002 12:30 AM
> > Subject: Re: VECTOR: WG 6100 GRY wire
> >
> > > Now I need to ask this: Is the wire marked GRY next to the large caps on
> > the
> > > deflection board also a ground?
> > >
> > > I have found on all thw WG 6100 parts I have that these wires have been
> > chopped
> > > (probably by ops.)
> > >
> > > Thanks much,
> > > Joe
> > >
> > > Chris Starr wrote:
> > >
> > > > I can confirm, definitely a grounding wire. Bolts on to the aluminum
> > chassis
> > > > on one of the holes between the HV chassis box and the deflection board
> > on
> > > > the right. Probably will help reduce the jitters you mentioned.
> > > >
> > > > c-starr
> > > >
> > > > ----- Original Message -----
> > > > From: "Michael Thomas" <thomin@bellsouth.net>
> > > > To: <vectorlist@synthcom.com>
> > > > Sent: Tuesday, April 09, 2002 9:51 PM
> > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > >
> > > > > The gray (grey?) wire attaches to the bottom aluminum plate of the
> > > > chassis,
> > > > > under
> > > > > the same screw as the wire coming from the spring that stretches
> along
> > the
> > > > > bottom
> > > > > of the tube. I would DEFINITELY re-connect it. As stated so many
> > times
> > > > > before
> > > > > on Vectorlist, grounds are very important.
> > > > >
> > > > > Michael
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
> > > > > To: <vectorlist@synthcom.com>
> > > > > Sent: Tuesday, April 09, 2002 4:31 PM
> > > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > > >
> > > > >
> > > > > > I just wired one of these, but I think it ties down to the chassis,
> > I
> > > > can
> > > > > take
> > > > > > a look tonight.
> > > > > >
> > > > > > L.
> > > > > >
> > > > > >
> > > > > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
> > > > > > >
> > > > > > > Where does the wire marked GRY next to the tube socket on neck
> > board
> > > > of
> > > > > a
> > > > > > > WG 6100 go to?
> > > > > > >
> > > > > > > Both mine have this broke off. Does this even make a difference?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Joe
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> --------------------------------------------------------------------------
> > > > > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE"
> > > > in
> > > > > the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > > > other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > > > >
> > > >
> > >
> --------------------------------------------------------------------------
> > > > > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE"
> > > > in
> > > > > the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > > > other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Yahoo! Tax Center - online filing with TurboTax
> > > > > > http://taxes.yahoo.com/
> > > > >
> > > >
> > >
> --------------------------------------------------------------------------
> > > > > -
> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE"
> > in
> > > > > the
> > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > >
> > > >
> > >
> --------------------------------------------------------------------------
> > > > -
> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> > in
> > > > the
> > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > >
> > >
> > >
> --------------------------------------------------------------------------
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> > >
> --------------------------------------------------------------------------
> > -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Apr 11 13:32:30 2002