RE: G08 part sources?

From: Mills, Lewis <lmills_at_mail.state.mo.us>
Date: Tue Jul 16 2002 - 17:23:20 EDT

Mouser has the 2N6259 for US$7.45

MPSU10 looks like: Vceo=300V, Ic=500mA, hFE@Ic=30mA=30min, fT=60MHz, Pd@25c
case=10W. You can try an RFQ to American Microsemi
(http://www.americanmicrosemi.com/cgi-bin/rfqentry.cgi?action=enterrfq&sourc
e=web&link=141292&query=mpsu10).
It appears to cross to 2N6558, which crosses to MJE340 or NTE171, both
available from Mouser.
Lewis
                                                  
> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of peter jones
> Sent: Tuesday, July 16, 2002 3:16 PM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: G08 part sources?
>
>
>
> -----Original Message-----
> From: "Mark Jenison" <jenison@enteract.com>
> To: <vectorlist@synthcom.com>
> Date: Wed, 10 Jul 2002 13:51:09 -0400
> Subject: VECTOR: G08 part sources?
>
> >
> > Hi all,
> >
> > Has anyone found sources for the following parts?
> >
> > MPSU10/NTE191/ECG191/SK3232
> > 2N6259
> > Custom IC 600 (would it be possible to engineer a
> replacement pcb for this
> > chip?)
> >
> > ...or has someone bought up all these in preparation to
> release the new and
> > improved G09! ;-)
> >
> > --
> > Mark Jenison
> >
> 1st. please stop quoting NTE / ECG numbers, these are not real parts.
>
> MPSU10 - ?2.00 + tax (u.k.)
> http://www.grandata.co.uk
>
> 300v .5amp NPN (if i new the max frequency i could find a
> modern equiv)
>
> i will check on the other stuff.
>
> --------------------------------------------------------------
> -------------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please
> direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jul 16 14:34:24 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:05 EDT