Jon Kotek wrote:
>Hey all, I am working on a 6100 that has me kinda stumped. I have a known
>good deflection board with an lv2000 on it. I have done a get well kit to
>the rest of the monitor (deflection transistors, HV parts) When I power the
>monitor up fuse F700 glows red hot and blows. Any ideas on what I should be
>looking at?
>
>
>Thanks!!
>
>Jon
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>
>
>
With a known good board all that's left are things that aren't part of
the board. This could be:
the HV power supply
chassis mounted transistors (shorted to chassis, wrong parts, bad parts)
grounded yoke lead
game board telling spot to deflect off screen (try with game board
disconnected)
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Sep 29 22:29:01 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:09 EDT