RE: Regarding the suggestions you made, with regard to ch ecking the TLO82 OP AMP

From: Stempak Arcadius-ASTEMPA1 <ASTEMPA1_at_motorola.com>
Date: Thu Oct 03 2002 - 23:27:48 EDT

Peter,
*******

 
> not sure, gonna have to print the schematics.
> as for the extender, just remove the boards from the cage, and put the
sound card at the front of the backplane.
> you dont need to run it in the cage, and the pcb's can plug in in any
order.

 Will keep messing with this Boardset, but appreciate any and all input(s).

Arcadius................ :-)

-----Original Message-----
From: peter jones [mailto:highwayman2000@mail.ru]
Sent: Thursday, October 03, 2002 9:50 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Regarding the suggestions you made, with regard to
checking the TLO82 OP AMP

-----Original Message-----
From: Stempak Arcadius-ASTEMPA1 <ASTEMPA1@motorola.com>
To: vectorlist@synthcom.com
Date: Thu, 3 Oct 2002 19:06:42 -0500
Subject: VECTOR: Regarding the suggestions you made, with regard to checking
the TLO82 OP AMP

>
> Peter,
> *******
>
>
> I did my best to Scope things out, so to speak, and
> noted that while the TLO 82 OP AMP, is recieving Power
> (12 Volts) O.K. and INPUT 1 / OUPUT 1 appear to be
> working, as far as I can tell, did not dawn on me,
> but should have, that this OP AMP, in this Case, is being
> used as an Inverting AMP. Anyway it appears that INTPUT 2 /
> OUTPUT 2 is not either recieving or outputting anything at all
>
> Anyone have any ideas ???
>
not sure, gonna have to print the schematics.

as for the extender, just remove the boards from the cage, and put the sound
card at the front of the backplane.

you dont need to run it in the cage, and the pcb's can plug in in any order.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Oct 3 20:55:44 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:12 EDT