Re: Re: ampliphone IMPORTANT!

From: Joe Bachmann <joe.bachmann_at_newmail.net>
Date: Fri Jan 31 2003 - 19:32:31 EST

Noted, but.... The picture tube only begins to produce x-rays at 25k+ (tube
dependant - some are more.) That is why you set the cut off to 25k. There are
sources on the net that can explain exctly why it happens, but I'm not going to
do that here.

Now if something broke of course...................

peter jones wrote:

> -----Original Message-----
> From: "Bachmann, Joe" <Joe.Bachmann@citadelgroup.com>
> To: <vectorlist@synthcom.com>
> Date: Wed, 29 Jan 2003 13:01:51 -0600
> Subject: RE: VECTOR: Re: ampliphone
>
> >
> > Thanks Tom.
> >
> > You may also like to try removing CR1 and Q5 from the circuit. I had
> > trouble with the regs blowing on one board. When you remove this you
> > completely disable the over voltage circuitry. I have had one running
> > like this for some time now.
> >
> > JB
> >
> NOO!
>
> if that circuit is used for the HV then it is there for a reason,
> removing it could result in you being seriously fucked-up.
>
> RADIATION POISONING, CANCER ETCH - GET THE PICTURE!!!!
>
> even if it's only for the LV side you can still damage your monitor.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Jan 31 16:18:59 2003

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:19 EDT