6100 hv units remade!!!

Hi,

It looks like the 6100 hv cage has been remade, should be avaliable soon
online.

Mark Capps

Joe Bachmann wrote:

>Noted, but.... The picture tube only begins to produce x-rays at 25k+ (tube
>dependant - some are more.) That is why you set the cut off to 25k. There are
>sources on the net that can explain exctly why it happens, but I'm not going to
>do that here.
>
>Now if something broke of course...................
>
>peter jones wrote:
>
>
>
>>-----Original Message-----
>>From: "Bachmann, Joe" <Joe.Bachmann@citadelgroup.com>
>>To: <vectorlist@synthcom.com>
>>Date: Wed, 29 Jan 2003 13:01:51 -0600
>>Subject: RE: VECTOR: Re: ampliphone
>>
>>
>>
>>>Thanks Tom.
>>>
>>>You may also like to try removing CR1 and Q5 from the circuit. I had
>>>trouble with the regs blowing on one board. When you remove this you
>>>completely disable the over voltage circuitry. I have had one running
>>>like this for some time now.
>>>
>>>JB
>>>
>>>
>>>
>>NOO!
>>
>>if that circuit is used for the HV then it is there for a reason,
>>removing it could result in you being seriously fucked-up.
>>
>>RADIATION POISONING, CANCER ETCH - GET THE PICTURE!!!!
>>
>>even if it's only for the LV side you can still damage your monitor.
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to vectorlist-owner@synthcom.com.
>>
>>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Feb 4 01:32:14 2003