RE: Gravitar Debug - HOT RAM

6116 or 2128 ram will work..

JB

-----Original Message-----
From: Tim Tewalt [mailto:tim@tewalt.com]
Sent: Tuesday, September 16, 2003 11:55 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: Gravitar Debug - HOT RAM

My Gravitar board has sizzling RAM at N/P1 and K7. They are TI
TMS4016-15NL devices. Sound correct? Is there a recommended substitute
part? The pins are black and the packages are too hot to touch. Common
problem?

I have the board on a test bench powered by a known good A/R II board,
but am unable to get a display in XY mode on my scope. I should be able
to get some sort of a disply even *without* the two RAM chips, right?

Sorry for not knowing this by now, but is there anything else I should
be looking for? Seems strange they would both fail in this manner, but
maybe not? These were the only two devices that were burning hot, so
I just thought I'd start with these.

Thanks in advance for any and all advice.

Tim
------------------------------------------------------------------------

---
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
** message body to vectorlist-request@vectorlist.org. Please direct
other
** questions, comments, or problems to chris@westnet.com .
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .