Re: Amplifone Grav>MH Conversion, Clock speeds??

>>Original boards had a 12.0 and 10MHz while the conversion boards replaced
:
them with a 10.0 and 8.9MHz respectively. :
                                                                            :
Dedicated Conversion :
--------- ---------- :
Y1=12MHz Y1=10MHz :
Y2=10MHz Y2= 8.9MHz :
10 pin edge connector 12 pin edge connector :
                                                                            :
Also the integration capacitors are DIFFERENT depending on the Y1 clock. :
If you change Y1 to a higher frequency, You will need to change the :
integration capacitor to a larger value (???). <<<

I borrowed the above from the MH faq Tom has begun. ThanksTom!

While we're on the subject of MH clock speeds, is there anyone who has a
dedicated boardset so that we can verify the component differences in the clock
curcuits? Especially, the integration caps in the clock curcuits?

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Jan 16 00:47:14 2004