My BZ rap-up

From: Christopher X. Candreva <chris_at_westnet.com>
Date: Sat Feb 14 2004 - 22:30:51 EST

So the patient is now cured. Replacing the LF13201 cleared up the blanking
problem, silicone stopped the leaking, and I think I've finally got all the
mathbox loose solder joints worked out.

It's quite instructive to look at a BZ screen on a scope without the Z amp
hooked up, and compare it to the screen with Z. You can see what the
blanking circuit is doing, and how the background really is put up in tiles
instead of being continuous.

This was fun -- I feel like I've learned something.

-Chris

==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Feb 14 22:30:53 2004

This archive was generated by hypermail 2.1.8 : Sun Feb 15 2004 - 15:50:01 EST