RE: TECH: Tempest +5v line

From: James Bright <james_at_quarterarcade.com>
Date: Sun Jun 06 2004 - 17:34:55 EDT

He's probably referring to this sort of mod:

http://tech.quarterarcade.com/tech/KB.aspx?g=1775&kb=2

JB

--James Bright
www.QuarterArcade.com
Restored Arcade Games for your Home

> -----Original Message-----
> From: owner-vectorlist@vectorlist.org [mailto:owner-
> vectorlist@vectorlist.org] On Behalf Of Roger Smith
> Sent: Sunday, June 06, 2004 4:58 PM
> To: vectorlist@vectorlist.org
> Subject: Re: VECTOR: TECH: Tempest +5v line
>
> Peter Jones wrote:
> "you should replace the edge connectors and "lock" the AR2 to disable
it's
> feedback circuit before doing anything else."
>
> I don't understand what is meant by"lock the AR2 to disable it's
feedback
> circuit". Thanks.
>
> Roger
>
>
> >From: "peter jones" <highwayman2000@mail.ru>
> >Reply-To: vectorlist@vectorlist.org
> >To: vectorlist@vectorlist.org
> >Subject: Re: VECTOR: TECH: Tempest +5v line
> >Date: Sun, 06 Jun 2004 20:28:56 +0400
> >
> >
> >-----Original Message-----
> >From: "Roger Smith" <whooshdoo@hotmail.com>
> >To: vectorlist@vectorlist.org
> >Date: Mon, 31 May 2004 15:02:52 -0500
> >Subject: VECTOR: TECH: Tempest +5v line
> >
> > >
> > > On my non-working Tempest UR there is 5.77v at J7 on the A/R II
board
> >and
> > > 5.62v at the edge connector of the main board. Is this ok?
> > >
> > > Rog
> > >
> >
> >you should replace the edge connectors and "lock" the AR2 to disable
it's
> >feedback circuit before doing anything else.
> >
> >otherwise you could end up with burned pcb's and a lot of dead chips
> >eventually.
> >you are allready getting voltdrop from the edge connector and it's
going
> to
> >get worse.
> >
>
>-----------------------------------------------------------------------

--
> --
> >** Unsubscribe, subscribe, or view the archives at
> >http://www.vectorlist.org
> >** Please direct other questions, comments, or problems to
> >chris@westnet.com
> 
> _________________________________________________________________
> Get fast, reliable Internet access with MSN 9 Dial-up - now 3 months
FREE!
> http://join.msn.click-url.com/go/onm00200361ave/direct/01/
> 
>
------------------------------------------------------------------------
--
> -
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jun 6 17:35:16 2004

This archive was generated by hypermail 2.1.8 : Sun Jun 06 2004 - 18:50:00 EDT