RE: Looking for p/n for neck board connector (Amplifone)

From: Bob Langelius <bob_at_miltonmerl.com>
Date: Fri May 20 2005 - 09:32:14 EDT

Stupid question here, but is the pinout the same as a vacuum tube( ie from
tube amp)?
 
Could you get a board mount socket and solder wires to it?
 
Bob

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Joe
Sent: Thursday, May 19, 2005 5:49 PM
To: vectorlist@vectorlist.org
Subject: RE: VECTOR: Looking for p/n for neck board connector (Amplifone)

The original connectors are no longer made. The company is no longer in
existence.

 

As Tom said, maybe a crt rejuvenator adaptor.

 

I know why you're fishing for this but you probably won't find it. At the
very least you won't find it where you can order a few of them. You will
need to order at least 1000 and that is a small order.

 

You are going to need to make a small board for this similar to the 15"
amplifone.

 

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of
Electronicamuse@aol.com
Sent: Thursday, May 19, 2005 4:32 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Looking for p/n for neck board connector (Amplifone)

 

The problem is that I'd like them to be similar to the Amplifone. Most that
I have seen are for used mounted to a circuit board, like the raster
monitors do.

 

Thanks

 

Dave

 

+++++Ask me about Retrocade 30-in-1 MultiPac kits for Midway Pac Man and Ms
Pac Man boards and same kit already attached to a new JAMMA PCB. Also we now
have purchased the rights to WG6100 (Tempest, etc) new deflection boards and
HVU boards. Also HVU boards for Amplifone (Star Wars). These are version 2
with no extra wiring or mods necessary. Ask about Star Wars overlays and new
cabinets for Midway cocktail, upright, mini, Dragon's Lair, Williams, Golden
Tee Fore, and Ultra-MAME++++

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri May 20 09:31:30 2005

This archive was generated by hypermail 2.1.8 : Fri May 20 2005 - 11:50:02 EDT