Re: ANNOUNCE: New Amplifone HVU PCBs (not modded WG)

From: Scott Caldwell <scottcaldwell_at_sbcglobal.net>
Date: Thu Jun 02 2005 - 19:14:18 EDT

Does this come with any type of a B+ adjustment or is that just for
raster chassis? A buddy of mine installed one of these last week
and his tube must be weak, because the picture was not very
bright. We cranked the brightness pot on the flyback, but that
didn't help much. I know on some raster cahssis the B+ can be
adjusted to help brighten the picture a little more. We're going to
try to rejuvinate the tube, but I figured I would ask since this came
up.

Scott C.

Electronicamuse@aol.com wrote:

> Please excuse the commercial nature of this post, but I figured that
> it's relevant. I'll have a cleaner pic once I make the new heatsink
> and wiring and I'll develop a simple info webpage for those gracious
> enough to link. Thanks
>
> http://www.members.aol.com/electronicamuse/Amp-HVU
>
> This is the new version of the Amplifone HVU replacement board. Thei
> is NOT the WG6100 HVU (also in stock), modded to work with the Amp.
> This is the new board that is the same size as original. The WG is
> smaller. This prototype has the original heat sink and wiring harness
> transplanted and works like a champ! I'll be building the production
> models starting this weekend. I am working on getting new heat sinks
> fabbed and will do wiring harnesses when I decide what to do with the
> neck connector, so the future units can come plug n play. For a fee,
> I'll transplant your wiring and heat sink and test the completed
> unit. Base price on the unit without heatsink and wiring is
> $159,shipped, which is the same for the WG6100 HVU. Version 2
> deflection units are next.
>
>
> Thanks
>
> Dave Grohowski
> Electronic Amusements
> electronicamuse AT aol DOT com
>
> +++++Ask me about Retrocade 30-in-1 MultiPac kits for Midway Pac Man
> and Ms Pac Man boards and same kit already attached to a new JAMMA
> PCB. Also we now have purchased the rights to WG6100 (Tempest, etc)
> new deflection boards and HVU boards. Also HVU boards for Amplifone
> (Star Wars). These are version 2 with no extra wiring or mods
> necessary. Ask about Star Wars overlays and new cabinets for Midway
> cocktail, upright, mini, Dragon's Lair, Williams, Golden Tee Fore, and
> Ultra-MAME++++

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jun 2 19:10:18 2005

This archive was generated by hypermail 2.1.8 : Thu Jun 02 2005 - 21:50:00 EDT