Re: 6100 HV help

From: simon hanlon <simonjhanlon_at_btopenworld.com>
Date: Sun Feb 05 2006 - 06:03:10 EST

Also check the trace between D901 and the HV transformer as they have been known to crack. check C916

The one with 10kv could be a bad ZD902
  ----- Original Message -----
  From: utahtaper
  To: vectorlist@vectorlist.org
  Sent: Sunday, February 05, 2006 7:32 AM
  Subject: VECTOR: 6100 HV help

  I have been working on two HV's and both have the exact opposite problem. One has HV at 29KV's(at anode) and the other has HV at 10KV's. Both have been capped and I have been through all resistors and they are all within tolerance. Diodes have been checked and test fine. Transisters are fine. Adjusting the POT(R18? off the top of my head) does nothing to change the voltage in either case. Both display an image just one is huge(10KV) and one I'm afraid of getting X-ray(29KV) exposure to. Is there something I'm missing here? Any suggestions?
  Thx,
  Jason

------------------------------------------------------------------------------

  No virus found in this outgoing message.
  Checked by AVG Free Edition.
  Version: 7.1.375 / Virus Database: 267.15.1/250 - Release Date: 02/03/2006

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Feb 5 06:03:10 2006

This archive was generated by hypermail 2.1.8 : Sun Feb 05 2006 - 09:50:00 EST