Re: Will this work for my 19v2000?

Without looking at the schematics, or my notes, I'm wanting to say either
tansformer will work, provided you rekey the main power distribution molex
connector. I think the G05-801 was expecting 30V, while the G05-802 did 24V?
Possibly. Easiest way is to get a copy of the early Asteroids schematics,
and compare them against the later revision (with the G05-802/V2000
monitors) and make sure you are putting all the correct voltages into it.

Both sets of schematics are on the xmission archive.

tm

Gregory Maser writes:

> What is the number? The Electron Forge web page has a chart with all the
> different part numbers and which machines they come out of. It could help.
> http://www.elektronforge.com/transassy.htm
>
>
> -----Original Message-----
> From: owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org]On Behalf Of Louis Srianomai
> Sent: Sunday, March 05, 2006 11:35 AM
> To: vectorlist@vectorlist.org
> Subject: Re: VECTOR: Will this work for my 19v2000?
>
>
> Here's a on top pic of the main connector, all female pins...
>
> The only etched part numbers is on the transformer itself, but isn't the
> part
> number for the assembly.
>
> http://lousarcade.com/p1010001.jpg
>
>
>
> --- Shawn Muller <shawnmuller@earthlink.net> wrote:
>
>> Hey Guys,
>>
>> Louis is providing me with a power block that will hopefully work with
>> my 19v2000. There doesn't seen to be a part number on it anywhere. Can
>> anyone identify it? Will this work for my 19v2000?
>>
>> http://lousarcade.com/atariblock1.jpg
>> http://lousarcade.com/atariblock2.jpg
>> http://lousarcade.com/atariblock3.jpg
>> --------------------------------------------------------------------------
 

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Mar 5 17:46:43 2006