R: Gravitar Cocktail

In case you want to use only gravitar PCB, I agree with jess, this is the
"minor impact possible" modification. And yes, you have to flip the x axis
too

and if you often want to swap pcbs then I suggest you to use that
4 pole double throw switch or 2x 2 pole double throw switch

-----Messaggio originale-----
Da: owner-vectorlist@vectorlist.org [mailto:owner-vectorlist@vectorlist.org]
Per conto di Bob Langelius
Inviato: mercoledì 22 marzo 2006 19.49
A: vectorlist@vectorlist.org
Oggetto: RE: VECTOR: Gravitar Cocktail

Could I do that with a 4 pole double throw switch? Is it ok to break into
that harness and add a bunch of wires? I need to flip X axis also don't I?

Bob

> -----Original Message-----
> From: owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org] On Behalf Of Jess Askey
> Sent: Wednesday, March 22, 2006 1:29 PM
> To: vectorlist@vectorlist.org
> Subject: Re: VECTOR: Gravitar Cocktail
>
> You can just flip the polarity on the Y axis at the
> deflection coils on the monitor. Don't have docs in front of
> me but you should be able to just swap the pins on the molex
> connector that goes up to the deflection coils on the
> deflection PCB for the Y Axis.

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Mar 22 19:38:00 2006