Re: Tempest problems

Mark,
That might not be a problem.
How much higher is it?
Is the secondary producing AC or DC?
Are the other winding specs close?
Perhaps a little mod to the primary circuit will effectively lower the
secondary output.
Like I mentioned before, the physical footprint and form look close enough.
It depends how far apart the specs is the 6100 from the 19v2000.
Does anyone have detailed data?

Thank you.
Tony

 ----- Original Message -----
From: "Mark Shostak" <xx.vl@cinelabs.com>
To: <vectorlist@vectorlist.org>
Sent: Monday, April 10, 2006 8:34 PM
Subject: Re: VECTOR: Tempest problems

> Negative; the 6100 anode voltage is much higher.
>
> On Mon, Apr 10, 2006 at 06:31:59PM -0400, Tony Roussos wrote:
>> Joe,
>>
>> Do you happen to have a scheme of the EHT transformer pinout and
>> associated voltages. I'm hoping I can use a 6100 transformer to work in a
>> 19v2000. They visually look similar. If it will take a comparable input
>> and provide an appropriate output, I would be happy.
>>
>> Tony
>> ----- Original Message -----
>> From: Joseph Magiera
>> To: vectorlist@vectorlist.org
>> Sent: Monday, April 10, 2006 4:34 PM
>> Subject: Re: VECTOR: Tempest problems
>>
>>
>> I have to admit I haven't trouble shot yet. I fully planned to this
>> past weekend, but too many family things came up. I did plan on cross
>> testing it with another good Tempest boardset and another good 6101.
>> I'll let the list know results.
>>
>> Joe
>>
>> "Christopher X. Candreva" <chris@westnet.com> wrote:
>> On Sun, 2 Apr 2006, joemagiera wrote:
>>
>> > Another game party casualty. After on for a few hours in a warm
>> room with
>> > 20+ other games on, my Tempest developed two problems:
>>
>> Since no one ever answered this I'm going with my standard: Have you
>> verified that it is the board or monitor ? I usually just hook up my
>> scope
>> in XY mode as a second monitor and compare the two images .
>>
>> I've seen weird things like this happen when I had loose solder
>> joints in my
>> monitor.
>>
>>
>> ==========================================================
>> Chris Candreva -- chris@westnet.com -- (914) 967-7816
>> WestNet Internet Services of Westchester
>> http://www.westnet.com/
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
>>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 10 21:08:10 2006