-----Original Message-----
From: "Pinx" <pinx.32@tesco.net>
To: <vectorlist@vectorlist.org>
Date: Fri, 25 Aug 2006 22:14:23 +0100
Subject: VECTOR: Tech WG6100
> Hi,
> i have a WG6100 in my SW cab and quite frequently it decides to die. Latest problem turned out to be a dead Q101 which i replaced along with a load of other parts in the LV section just as a matter of course, it then played perfect for 3 hours solid and was turned off. Turning it back on next day it died again within 10 minutes. So i removed the Deflection pcb yet again only to find the diode at D104 had died (brand new 1N4148) so i replaced this and within another ten minutes the same diode had gone again. Any idea's what could be causing this ?
> The only things i havent replaced in the LV section are the 2 Zener Diodes that are marked up incorrectly as R104 and R105, though these meter ok out of circuit.
>
> TIA,
>
>
> Pinx
>
>
make sure you have a good solid ground connection between the monitor, gameboard and psu when this type of thing happens.
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Aug 25 18:32:13 2006
This archive was generated by hypermail 2.1.8 : Sat Aug 26 2006 - 00:50:00 EDT