Could be any number of things from voltages to a bad reset switch on the
board itself (that is
what happened to mine when it was doing this). Do you have another
board you can swap
in and have you reseated the various PROMs, checked voltages, the edge
connector, etc.?
Scott C.
Brent wrote:
> Hi,
>
> I have a Tempest board (with Clay's multi kit installed) that was
> working fine. Now, it will keep resetting. It will do this during
> gameplay or in attract mode. Doesn't seem to be any pattern as to when
> it resets. Sometimes I can start and play a couple of levels before it
> resets, and sometimes it will reset several times in a minute. Any
> thoughts on what might be causing this?
>
> thanks,
>
> Brent
> ---------------------------------------------------------------------------
>
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Sep 6 08:22:35 2007
This archive was generated by hypermail 2.1.8 : Thu Sep 06 2007 - 08:50:00 EDT