Re: Star Wars WG 6100 all colour in middle of screen problem.

From: David Johnston <dataspa_at_gmail.com>
Date: Thu Feb 14 2008 - 13:40:31 EST

Thanks again!
Do you know off hand what the correct voltage at the anode should be?
(Or the voltage range.)

On Thu, Feb 14, 2008 at 1:14 PM, simon hanlon
<simonjhanlon@btopenworld.com> wrote:
> Hard to say but I would check the voltage at the Anode first before doing
> anything. You will need an HV probe.
>
> -----Original Message-----
> From: owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org] On Behalf Of David Johnston
> Sent: 14 February 2008 18:07
> To: vectorlist@vectorlist.org
>
> Subject: Re: VECTOR: Star Wars WG 6100 all colour in middle of screen
> problem.
>
> Do you think a rebuild kit would be the solution or does this seem
> like a bigger yoke issue?
>
> On Thu, Feb 14, 2008 at 1:01 PM, simon hanlon
> <simonjhanlon@btopenworld.com> wrote:
> > Picture will get smaller as the HV increases, maybe the over voltage
> > protection has failed which would explain the crackling noise! Don't turn
> it
> > on again it could be very dangerous especially when standing directly
> behind
> > of in front.
> >
> >
> > -----Original Message-----
> > From: owner-vectorlist@vectorlist.org
> > [mailto:owner-vectorlist@vectorlist.org] On Behalf Of David Johnston
> > Sent: 14 February 2008 17:54
> > To: vectorlist@vectorlist.org
> > Subject: VECTOR: Star Wars WG 6100 all colour in middle of screen problem.
> >
> > Hi,
> > I picked up a Star Wars upright recently. It has a WG 6100 in it. When
> > you power it up all the screen is dispplayed in a circle about 1.5" in
> > diameter. I have rebuilt a 6100 in the past from a Bob Roberts deluxe
> > kit but I'm not sure what thee issue is with this and was hoping
> > someone could help. Someone told me it may be the 'yoke' but I no idea
> > if that is the case or not. ALSO the monitor make a crackeling sound
> > the whole time it's on. I haven't left it on for long because I don't
> > want to cause more problems. Any info would b greatly appriciated!
> >
> > Thanks!
> > David
> >
> ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to
> chris@westnet.com
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.516 / Virus Database: 269.20.4/1277 - Release Date: 2/13/2008
> > 20:00
> >
> >
> >
> >
> >
> ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to
> chris@westnet.com
> >
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.20.4/1277 - Release Date: 2/13/2008
> 20:00
>
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 14 13:40:35 2008

This archive was generated by hypermail 2.1.8 : Thu Feb 14 2008 - 14:50:00 EST