On Sun, 2 Mar 2008, John Huie wrote:
> When I fire up the monitor with only the main harness plugged in, the
> LV2000 gives the proper +26 and -26 voltages and both LED's on it or on.
> But when I plug in the HV unitl and power it up, they both come on for
> about 5 seconds and then the right hand led goes back out.
I would guess there is a short of some kind in the HV system that overloads
the LV2000, which then shuts down.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 948-3162
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Mar 4 11:39:01 2008
This archive was generated by hypermail 2.1.8 : Tue Mar 04 2008 - 13:50:00 EST