Re: Which Chassis to drive a 25" A63ABZ26X ?

From: Malcolm Mackenzie <maxstang_at_sbcglobal.net>
Date: Sat Jul 05 2008 - 19:43:13 EDT

I'm attempting to do this as well Colin. My understanding is that you only need the 6100 yoke ( it's the same part as the 25" Amplifone yoke) and then the HV and deflection boards from the Amplifone. -Malcolm

Colin Davies <colin.w.davies@btopenworld.com> wrote: Hi Guys,
   
  I've been offered a 25" A63ABZ26X picture tube for my Starwars cockpit which is currently fitted with a 19" WG6100. I also have a 19" Amplifone monitor complete.
   
  Is this a drop in replacement for the origonal amplifone tube running from an amplifone chassis (fitted with 6100 yoke), or do I need to use a 6100 chassis to drive this ?
   
  I think the pinouts are different on the two chassis / tubes looking at the manuals, but can anyone confirm please ?
   
  One of the kind members on here has pointed me to this article...which leads me to belive that I do need to use a 6100 chassis / neck board.
   
  http://groups.google.com/group/rec.games.video.arcade.collecting/browse_thread/thread/15bc596122ad8409/cdc315860f1194b2?lnk=gst&q=amplifone+25+19&rnum=26
   
  Thanks, Regards,
  Colin

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Jul 5 19:43:16 2008

This archive was generated by hypermail 2.1.8 : Sat Jul 05 2008 - 21:50:00 EDT