Re: Who's hogging all the Catbox docs

William Boucher wrote:
> Wow, cool reading, thanks for the link. Now if I only had the rom file
> for the eprom chip at C5, I could build one of these from scratch. I'm
> sure that someone who is good with FPGA's could do a large chunk of the
> catbox, if not all of it, in one of those.

Yep, same site from which you took at the Cinematronics Exorcisor
materials from.

As you note below, the CatBox is mostly useless if you have an HP5004A.

tm

> With respect to signature analysis on the Cinematronics CPU board, the
> setup is using the 16-bit counter (and a few gates) to cycle the board
> logic and an HP 5004A signature analyzer box. I read somewhere that HP
> used their own proprietary CRC algorithm but I have to wonder if it
> would be possible to scratch build a signature display that would show
> the same values. Obviously, Atari designed their own sig generator with
> the very simple catbox circuitry so it's certainly possible to build
> something that would do the job. The HP5004A unit is getting pretty old
> and it can be hard to find one that is still working. It's hard to sell
> the Cine Exorciser to people that do not have the HP5004A unit. It
> would be nice to combine an Exorciser with its own sig display. Then
> the HP5004A unit would not be needed. Maybe a CPLD sig generator
> circuit could be built that could be combined with a simple
> microcontroller, say a Microchip PIC that could control a simple LCD for
> the readout and any other settings or indicators desired. The trick is
> to get it to generate the exact same sig codes as the HP5004A does. I
> assume that that would require getting the value of the polynomial
> correct, that is assuming that HP didn't really muck about too much when
> it came to make their sig generator proprietary.
>
>
> William Boucher
>
>
> ----- Original Message ----- From: "Tom McClintock" <tomm@bhpllc.com>
> To: <vectorlist@vectorlist.org>
> Sent: Monday, November 23, 2009 6:54 PM
> Subject: Re: VECTOR: Who's hogging all the Catbox docs
>
>
>> http://ionpool.net/arcade/signature_analysis/How_Atari_Signature_Analysis_Works.html
>>
>>
>>
>> ?
>>
>> Kevin Moore wrote:
>>> Seems every site I've tried is no longer around.
>>>
>>> I'm looking for some links to catbox info, I've been able to use the
>>> cat box for basic tempest stuff using the tempest doc I have, but
>>> when it comes to doing sig analysis I'm doing something wrong.. I
>>> can't get any sigs to come up.
>>>
>>> Thanks,
>>>
>>> Kevin
>>>
>>
>> ---------------------------------------------------------------------------
>>
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Nov 23 20:00:07 2009