RE: Tragic 19VLUP22 tube...Please help if you can

From: Bob Langelius <bob_at_miltonmerl.com>
Date: Sun Jun 13 2010 - 13:56:33 EDT

http://www.hawkeyepicturetube.com/

 

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Pat Danis
Sent: Sunday, June 13, 2010 1:19 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Tragic 19VLUP22 tube...Please help if you can

 

Hawkeye tubes will rebuild that tube for you including repairing that crack.
I don't have a link. do a google search.

Pat Danis

On 6/13/2010 3:30 AM, Andrew Welburn wrote:

Have you tried a CRT rejuvenator on it yet? If its not a bad short, you can
blow that shorted crap right out with one of those. If nothing else, it will
let you know exactly what is up with the tube.

 

--
Andrew Welburn
http://www.andys-arcade.com
----- Original Message ----- 
From: MKDUD@aol.com 
To: vectorlist@vectorlist.org 
Sent: Sunday, June 13, 2010 4:11 AM
Subject: VECTOR: Tragic 19VLUP22 tube...Please help if you can
 
Hello,
 
     I have been helping a friend restore his Tempest, and he recently was
able to get a NOS 19VLUP22 tube . Tube seemed to be packed pretty well, in
original NOS box, and looked good when unpacked. Never was bumped, jarred,
or mishandled in any way during installation. Installed tube to chassis,
began convergence. 
 
    Yoke and purity assembly  were both still LOOSE, nothing tightened.
Moved yoke carefully forward to do green calibration, screen was getting
nice green crosshatch, starting to look good, suddenly the tube fades goes
dark. I'm thinking, something must be up with the HV, I still hear yoke
chatter, spot killer is off, picture was there, then faded. Suddenly, I hear
the sizzle, and see the blue arc in the neck, and want to start ripping the
rest of my hair out...  
 
     Does anybody have a source on new tubes? Please help if you can. 
 
     The old tube in this game has so much phosphor burn that it is almost
unusable, former owner had to leave this poor thing running for a LONG time
with no signal to monitor, the burns are terrible.
 
I remember Richardson electronics, but I guess they're long gone as a tube
supplier of these..Please help if you can.
 
Thanks Very Much,
Michael Kelley 
 
 
 
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.829 / Virus Database: 271.1.1/2934 - Release Date: 06/13/10
01:35:00
 
  
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jun 13 13:56:45 2010

This archive was generated by hypermail 2.1.8 : Sun Jun 13 2010 - 17:50:01 EDT