I hooked up my Oscope to the X and Y out - I am getting signal, and flipped
it for horizontal view for the second signal. I am no pro at using my
Oscope, or I am sure this would be far easier than it is working out to be.
I did at least figure out how to get the XY to plot properly on the display,
so I can see the game play. I have yet to figure out if the output is too
low on either side yet..
One thing I did see was that every now and then the display 'goes away',
only to return 2-3 seconds later. It will then stay ok for 20-30 secs or so,
this go away again. Any thoughts?
On Mon, Aug 30, 2010 at 12:12 AM, Rodger Boots <rlboots2@gmail.com> wrote:
> How the spellchecker on my cellphone got volunteer from voltmeter is
> anyone's guess. Shame on me for not proofreading.
>
> On Aug 29, 2010 11:08 PM, "John Robertson" <pinball@telus.net> wrote:
>
> Rodger Boots wrote:
> >
> > Certainly sounds like a board problem.
> >
> > If you have a scope just look at ...
>
> "Use a volunteer."? That's interesting - I always figured the swing on the
> board test points was only a couple of volts AC and thus unlikely to ruffle
> even the most sensitive volunteer...
>
> Now I have used my own tongue to check if a 9V battery is good - can you
> determine AC/DC that way too? Knowing more will help in those situations
> where I have forgotten to take my voltmeter on a repair job...and have a
> spare person about.
>
> John :-#)#
>
>
> >>
> >> On Aug 29, 2010 10:48 PM, "Ty Roden" <ty.roden@gmail.com> wrote:
> >>
> >> I have a Wells 19K6100...
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com
> "Old pinballers never die, they just flip out"
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 30 08:41:30 2010
This archive was generated by hypermail 2.1.8 : Mon Aug 30 2010 - 10:50:01 EDT