Re: Cleaning pins works for Battlezone too.

From: Douglas Gauck <douglas_at_gauck.com>
Date: Mon Sep 19 2011 - 10:09:20 EDT

And the second would be to reflow the header pins on the interconnect cable, even when you're sure they look just fine. I finally did it on my Tempest and lo, now it works.

-Douglas

Sent from my iPhone

On Sep 19, 2011, at 8:44 AM, "Travis Shire" <boardjunkie@techie.com> wrote:

> That is the first thing you do when confronted with a non functional or partially functioning board.
>
>
>> ----- Original Message -----
>> From: Christopher X. Candreva
>> Sent: 09/16/11 09:53 PM
>> To: vectorlist@vectorlist.org
>> Subject: VECTOR: Cleaning pins works for Battlezone too.
>>
>>
>> Whoda thunk it ?
>> :-)
>>
>> After years of trying to find what pins needed to be soldered on my BZ
>> mathbox, I decided to try the pin cleaning trick. That one Signetics chip
>> was the culprit, with completely black pins.
>>
>> Cleaned them up with an eraser and she's running fine. Thanks for the tip.
>>
>> ==========================================================
>> Chris Candreva -- chris@westnet.com -- (914) 948-3162
>> WestNet Internet Services of Westchester
>> http://www.westnet.com/
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Sep 19 10:09:31 2011

This archive was generated by hypermail 2.1.8 : Tue Sep 20 2011 - 19:50:02 EDT