RE: Cine Monitor problem

From: Omar Vega <omv_at_cinematronics.org>
Date: Tue Nov 29 2011 - 23:07:23 EST

Two things to check offhand. The first is the ribbon cable but it is most
likely one of the pots on board.

 

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of vernimark
Sent: Tuesday, November 29, 2011 10:37 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: Cine Monitor problem

 

Hi All,

some days ago my star hawk bagan to have the problem shown in the picture. I
swapped PCB with a speed freak but the problem was still there, so it is a
monitor problem.

I already changed all on board regulators (78/7915,78/7918) and all four TO3
transistors but nothing changed. lf133331 had been substituted with another
one too.

Do you have any idea?

 

regards,

Marco

=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 9.0.0.888, Virus/Spyware Database: 6.18790)
http://www.pctools.com <http://www.pctools.com/?cclick=EmailFooterClean_51>
=======

=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 9.0.0.888, Virus/Spyware Database: 6.18790)
http://www.pctools.com/
=======

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Nov 29 23:05:59 2011

This archive was generated by hypermail 2.1.8 : Tue Nov 29 2011 - 23:50:03 EST