Re: Problems restoring a SPEED FREAK

From: John Robertson <pinball_at_telus.net>
Date: Thu Jan 12 2012 - 01:27:02 EST

vernimark wrote:
> Hi All,
> I finished to restore my SPEED FREAK sone days ago when the HV transformer
> decided to die. Tripler is ok.
> Do you know where to find/buy a replacements?
> OR
> Do you have a complete monitor PCB for sale?
> Attached the last picture of the (still) working cabinet :(
>
>
> and here a short movie
> http://www.youtube.com/watch?v=-hTvIEjMFr4&feature=g-upl&context=G2181f98AUA
> AAAAAAAAA
>
> regards
> Marco
>
>
I have a couple of NOS HV transformers left for Vector/Cine monitors @
$75 each.

Are you sure it is bad? Sometimes one of the tiny wires broke and with
careful soldering one could bring it back to life.

Do a continuity check to see if that may be the problem, be very careful
testing the wires, they are very thin gauge!

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jan 12 01:27:18 2012

This archive was generated by hypermail 2.1.8 : Thu Jan 12 2012 - 07:50:00 EST