Re: vetor: ZVG playing up

I like a part that is sealed to keep dust out of the wiper area. The boxed parts have a more convenient adjustment slot and typically provide a better value tolerance and temperature stability. If you don't mind paying a buck more, you could try one of these...

http://search.digikey.com/us/en/products/ST32ETA103/ST32ETA103CT-ND/738468
http://search.digikey.com/us/en/products/3314J-1-103E/3314J-103ECT-ND/86559
http://search.digikey.com/us/en/products/3313X-1-103E/3313X-103ECT-ND/1232575

If you want to check the footprint measurements, download the datasheets from the above pages and compare their recommended PCB patterns to your original, or just compare the mechanical drawing measurements to your original part.

William Boucher
http://www.biltronix.com
  ----- Original Message -----
  From: Tim Iskander
  To: vectorlist@vectorlist.org
  Sent: Sunday, February 12, 2012 10:26 AM
  Subject: Re: VECTOR: vetor: ZVG playing up

  On 2/12/2012 10:02 AM, Rodger Boots wrote:
    On Feb 12, 2012 8:39 AM, "Tim Iskander" <timiskander@gmail.com> wrote:
>
> On 2/12/2012 1:15 AM, Rodger Boots wrote:
>>
>> A quick search shows 1173 of them at http://www.questcomp.com/QuestDetails.aspx?pn=TC03X-2-103E&pnid=208817&stock=YesOnly <http://www.questcomp.com/QuestDetails.aspx?pn=TC03X-2-103E&pnid=208817&stock=YesOnly>
>>
>> Digikey's http://search.digikey.com/us/en/products/PVZ3G103C01R00/490-4611-1-ND/1203954 is VERY close to being the same part.
>>
> Except the digikey part is surface mount :(

    They are BOTH surface mount.

  Doh... That'll teach me to pay attention (probably not, but it should :) )
  I breezed right past the whole ZVG bit and was thinking classic vectors :O
  cheers
  /Tim

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Feb 12 12:08:36 2012