Re: Cabinet wood and trim repair

From: Chad Tower <tower_at_gis.net>
Date: Tue Mar 27 2012 - 17:44:39 EDT

There is a ton of really good info on that at the forum at
arcadecontrols.com.

Chad

Connected by DROID on Verizon Wireless

-----Original message-----
From: Al Warner <alw@alsarcade.com>
To: vectorlist@vectorlist.org
Sent: Tue, Mar 27, 2012 17:54:09 GMT+00:00
Subject: Re: VECTOR: Cabinet wood and trim repair

I actually made a video about this 7 years ago showing the process. It
came out really well. I used Bondo and built it up slowly. Lots of
sanding and eventually finished it off and painted it - looked good. We
never released that DVD though. Too slow paced.

On March 27, 2012 at 9:01 AM Jim Thompson <ifixaudio@hotmail.com> wrote:

> Hey Group,
> Is there any info out there or archived on the list on how to do cabinet
> corner and trim repair?
> The Tempest machine I obtained has some pretty bad cabinet corners and
> loose trim from missing wood.
> I was thinking fiberglass, bondo or an epoxy but thought I had better
> consult with the pros.
>
> Thanks
>
> Jim
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Mar 27 17:44:34 2012

This archive was generated by hypermail 2.1.8 : Tue Mar 27 2012 - 17:50:00 EDT