Re: SEGA G80 - Star Trek Draw Problem..

That's a pretty odd one.

Your description makes it sound like the vectors are still in the output, but without color information.

I don't know what would cause this, especially on a single color and on ONE section of the screen.

I've seen some boards that still put out the XY signals, but if the color is missing, nothing shows up.

Kerry

---- Arcadius Stempak <arcademanx@yahoo.com> wrote:
> All,
 
 After some troubleshooting into this issue (which affects the G80 - Control Card - only),
I was wondering if anyone else may have run into this, since I am pretty much out of ideas.
 
Ok so here is the scenario..
 
Original problem:
Complete lack of the color Green - missing lines - since resolved by replacing U2 on the Control Card.
 
 
Current problem:
 While the color Green is now present in the middle and lower sections of the Monitor
(imagine diving the screen into 1/3 rd's) and there is no problem with Line Draw, etc.
 
  Main problem is that the color Green is missing (not at all present and all Green Lines are not being Drawn
in the Upper 1/3 rd of the screen). This includes the Gauge on the Upper left hand side of the screen, which is
also missing the Green Lines and Triangle indicator.
 
 However, when I hook up the X/Y Outputs to an Oscilloscope All Lines are present (but only in black and
white).
 
 Also swapping Control Cards with a Good Set - displays All lines / Colors correctly - so not a monitor issue.
 
 After replacing the Memory (which did not change anything), any ideas as to what could be causing this issue?
Or better yet what on the Control Board, corrolates to ' Draw ' and the color ' Green ' / upper 1/3 or the screen ?
 
 Appreciate your help,
 
Regards,
_Arcadius

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 2 17:13:58 2012