Re: Tempest

From: Matt McCullar <mccullar_at_flash.net>
Date: Thu Jul 12 2012 - 13:28:50 EDT

You may want to try the single-EPROM upgrade that eliminates all the 2716s. I've seen it done and it works. You can even download the file for the 27512 or whatever it is from somewhere. That way you have to work on only one socket.
Matt McCullar

Sent from my iPhone

On Jul 11, 2012, at 3:19 PM, Robert Bayes <robertab@swbell.net> wrote:

> I have a Tempest game that (surprise) has been difficult to keep running. When it fails, I'll pull the boards out, remove all the socketed proms, clean them and the sockets and reseat them and, it'll be good for another month or so. Last time, I was seeking a more permanent solution so I reflowed all the solder connections on the prom sockets and the interboard connectors. It worked for a couple of months but now, it has failed again. I know it's the proms again because the self test works fine. It's just when I switch to game mode that the screen goes blank.
>
> Two questions:
>
> 1.) I don't have a memory map so could someone suggest to me which proms contain the game software? I don't want to bother those proms that are still working by reseating them again.
>
> 2.) Would replacing all the proms help? I mean, besides the external connections do proms actually fail where they become flaky? I've always thought that proms either work or they don't--not that they can only work sometimes.
>
> Thanks.
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jul 12 13:29:14 2012

This archive was generated by hypermail 2.1.8 : Fri Jul 13 2012 - 11:50:01 EDT