Re: G08 Magic Smoke HV regulator - R306

From: <SVerlander_at_aol.com>
Date: Mon Aug 13 2012 - 01:09:08 EDT

Ok I looked it up and this is what I found
 
These are 1/2 Watt types . Carbon Resistors.
The value is 4R7 ( 4.7 ) Ohms at a 10% tolerance.
 
 
In a message dated 8/13/2012 12:33:02 A.M. Eastern Daylight Time,
zittware@hotmail.com writes:

 
I’m repairing a G08 for a local friend of mine; while Recapping the
monitor and reflowing the solder joints on the connectors -
I noticed the “magic smoke” appears to have escaped R306 on the HV
regulator board long ago (IE I haven’t smelled anything). The resistor appears to
once have been
Orange Orange Gold
or 3.3ohm if I calculated it correctly.
_http://www.flickr.com/photos/52968060@N00/7771330016/sizes/z/in/photostream
/_
(http://www.flickr.com/photos/52968060@N00/7771330016/sizes/z/in/photostream/)
 
The schematics I have are nearly unreadable in this section of the
schematic but from what I can tell the schematic seems to indicate 4.7k or maybe
4.7ohm hard to tell.
 
Can someone confirm what the resistor should be?
Is there a better high rez schematic floating around somewhere?
 
John

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 13 01:09:23 2012

This archive was generated by hypermail 2.1.8 : Mon Aug 13 2012 - 06:50:00 EDT