Re: jumping subsequent vectors - Omega Race

From: Kevin Moore <talon.k_at_gmail.com>
Date: Fri Aug 31 2012 - 17:47:40 EDT

OK Doug, I just confirmed on my personal machine that yes in fact the BBU
will check good without a battery in place.

Kevin
 On Aug 31, 2012 4:13 PM, "Andre" <livnfree_can@yahoo.com> wrote:

> I have never had bbu work/ pass. I did post a couple months back though
> that on a mint pcb I had that had a bbu error on self test passed when I
> removed the sound card. I replicated that on some, not all, other pcb's if
> that helps at all.
> --
> Sent from my Android phone.
>
> Douglas Gauck <douglas@gauck.com> wrote:
>>
>> Hi all,
>>
>> I am finishing up the reproduction main board for Omega Race and after finding a few missed traces both the program and vector sides are running. I have two problems remaining: self test passes all but the darned BBU RAM, and I have jumping vectors:
>>
>> http://www.gauck.com/arcade/reprOR/testing/IMG_4042.MOV
>>
>> Drawing was better (but not perfect) up until the time I was testing voltage at RAM H1 and slipped. Killed one of the VROMs. Interesting problem, easiest to analyze on a text screen... the first letter in the line of text is fine, then as more vectors are drawn they get further out of alignment. And they move - not a static misalignment - jumping up and down and side to side. Does it with graphics and on the test screens but to a lesser extent (since there are fewer vectors in test).**
>> Seems as if when the state machine first loads new coordinates, all is well, but then starts losing track of where the beam is.
>>
>> I swapped out all RAM, the latches (273s), the multipliers (7497s), counters (191s), the multiplexers (157s), and the flip-flops (374 / 174s). Yay sockets. It sure seems digital to me, but what's left?
>>
>> The BBU would also be nice to solve. It doesn't work on any of my original boards either. Haven't really dug into that one but if anyone has one that does work, is the battery required in circuit to pass self-test?
>>
>> -Douglas
>> ------------------------------
>>
>> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to chris@westnet.com
>>
>>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Aug 31 17:47:51 2012

This archive was generated by hypermail 2.1.8 : Fri Aug 31 2012 - 19:50:01 EDT