Re: Major Havoc fluke 9010a rom testing

From: Rodger Boots <rlboots2_at_gmail.com>
Date: Tue Jan 22 2013 - 21:58:55 EST

Nevermind, that's RAM not ROM.

On Tue, Jan 22, 2013 at 8:57 PM, Rodger Boots <rlboots2@gmail.com> wrote:

> Try 1780 instead of 1740.
>
>
>
> On Tue, Jan 22, 2013 at 7:51 PM, Kevin Moore <talon.k@gmail.com> wrote:
>
>> Well, I must be doing something wrong..
>>
>> I do a write to 1740 = 00
>> then do a rom 2000-3FFF
>>
>> I come up with a 2057
>>
>> Do a write to 1740 = 01
>>
>> Rom 2000-3FFF still get 2057
>>
>> So then I did a Read at 1740 and it's showing FF no matter what I write
>> to it.
>>
>> This is a known working board that I'm trying to do this on. I should be
>> able to do this right?
>>
>> Kevin
>>
>>
>>
>> On Tue, Jan 22, 2013 at 6:16 PM, Jess Askey <jess@askey.org> wrote:
>>
>>> Yes, page 0 and 1 are in one ROM and page 2 and 3 in the other. I didn’t
>>> think about that. J****
>>>
>>> ** **
>>>
>>> *From:* owner-vectorlist@vectorlist.org [mailto:
>>> owner-vectorlist@vectorlist.org] *On Behalf Of *Kevin Moore
>>> *Sent:* Tuesday, January 22, 2013 5:26 PM
>>>
>>> *To:* vectorlist@vectorlist.org
>>> *Subject:* Re: VECTOR: Major Havoc fluke 9010a rom testing****
>>>
>>> ** **
>>>
>>> That's what I was thinking.
>>>
>>> But the sigs are for the two roms.. will I need to split the roms, and
>>> run sig calc on the halves to get the right sigs?
>>>
>>> Kevin
>>>
>>> ****
>>>
>>> On Tue, Jan 22, 2013 at 6:05 PM, Jess Askey <jess@askey.org> wrote:****
>>>
>>> The 2 ROM’s are broken down into 4 pages… so in order to access them….**
>>> **
>>>
>>> ****
>>>
>>> Page 0: Write 00 to 0x1740 then read 0x2000-3fff****
>>>
>>> Page 1: Write 01 to 0x1740 then read 0x2000-3fff****
>>>
>>> Page 2: Write 02 to 0x1740 then read 0x2000-3fff****
>>>
>>> Page 3: Write 03 to 0x1740 then read 0x2000-3fff****
>>>
>>> ****
>>>
>>> That should do it for you!****
>>>
>>> ****
>>>
>>> *From:* owner-vectorlist@vectorlist.org [mailto:
>>> owner-vectorlist@vectorlist.org] *On Behalf Of *Kevin Moore
>>> *Sent:* Tuesday, January 22, 2013 4:05 PM
>>> *To:* vectorlist@vectorlist.org
>>> *Subject:* Re: VECTOR: Major Havoc fluke 9010a rom testing****
>>>
>>> ****
>>>
>>> I believe you are correct about FFFF being the range of the 6502, which
>>> makes it all the more odd that Quarter Arcade has such a high address
>>> listed.
>>>
>>> http://tech.quarterarcade.com/tech/VM.aspx?g=1669&set=mhavoc
>>>
>>> Probably just a mistake.
>>>
>>> The Memory map on the MH Schematics show the Range, and for the Rom/s
>>> in question the range should be 2000-3FFF but you have to page between the
>>> two somehow, and that's were I'm failing.
>>>
>>> It looks like the address 1740 is used to page between the two roms, but
>>> since I've never had to do that, I'm unable to verify the roms.
>>>
>>> The Rom at 8000-BFFF and C000-FFFF are not paged and I can check just
>>> fine. Mind you that this is all on the Alpha processor. Not the Gamma I
>>> haven't gotten that far as of yet.
>>>
>>> Kevin****
>>>
>>> On Tue, Jan 22, 2013 at 3:55 PM, Andre Huijts <a.huijts@upcmail.nl>
>>> wrote:****
>>>
>>> Its not outside the Fluke's range, it's outside the 6502 range....8 bit
>>> processor is FFFF max.
>>> Or am I missing something ?
>>>
>>>
>>>
>>> Op 22 jan. 2013 om 21:54 heeft Kevin Moore <talon.k@gmail.com> het
>>> volgende geschreven:****
>>>
>>>
>>> > So I'm trying to work on a major havoc, but I'm not to clear on how to
>>> run rom checks on the paged roms..
>>> >
>>> > Quarter Arcades site has the rom range 10000-13FFF for 136025-215, but
>>> the address range is outside the flukes range. Looks like to me the
>>> actually address should start at 2000-3FFF. I'm not at all familiar with
>>> the MMUPAGE0 addressing.
>>> >
>>> > Any pointers, or information I can read?
>>> >
>>> > Thanks,
>>> >
>>> > Kevin
>>> >****
>>>
>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com****
>>>
>>> ****
>>>
>>> ** **
>>>
>>
>>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jan 22 21:59:21 2013

This archive was generated by hypermail 2.1.8 : Tue Jan 22 2013 - 22:50:01 EST