Re: Unraveling the Star Wars harness

From: Douglas Gauck <douglas_at_gauck.com>
Date: Wed Jul 31 2013 - 16:09:56 EDT

Make sure you don't mix up the 9 pin plugs on the ARII board!

-Douglas

Sent from my iPhone

On Jul 31, 2013, at 2:50 PM, Jimmy Ipock <jipock@gmail.com> wrote:

> I believe one of those plugs..the large one is the vector monitor connector.
> The smaller plug on the PS is the 110/220v selection plug.
>
>
>
> On Wed, Jul 31, 2013 at 8:27 AM, Joel Griffin Dodd <griffindodd@gmail.com> wrote:
>> Hi guys.
>>
>> I'm trying to piece together an entire star wars cabinet and have had a lot of success gathering everything (special thanks to Pat).
>>
>> Connecting up my wiring harness I have everything plugged in except for speakers and monitor and I'm a little confused about the plugs I have left over. I've attached pictures of the three plugs I'm still trying to identify. I assume one is to the amplifone one to the speakers and other mystery things not sure on the third.
>>
>> Can you identify these remaining plugs?
>>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Jul 31 16:10:55 2013

This archive was generated by hypermail 2.1.8 : Wed Jul 31 2013 - 17:50:00 EDT