Re: 9010a RS232 problem?

From: Danny Pearson <>
Date: Mon Jan 04 2010 - 15:16:10 EST

Hi Kevin, make sure the RS232 card is firmly seated. I had issues which I
resolved by reseating it a bit more firmly and screwing it down tight.



-----Original Message-----
[] On Behalf Of Kevin Moore
Sent: 03 January 2010 21:18
To:; Technical Tools Mail List
Subject: Re: [Techtoolslist] 9010a RS232 problem?

It's not a pod problem, I can use the fluke normally w/o problem. I'm trying
to hook up the rs232 to a computer to upload scripts. It only resets after
hitting enter/yes after doing an Aux/if, read. while trying to send a script
to the fluke.

I've been trying to read up on the program to test the rs-232, but I've not
programed the fluke manually before, so It get's a little confusing manually
entering the program.

I have checked the power supply for problems etc when I first got it about 6
months ago.

On Sun, Jan 3, 2010 at 2:28 PM, John Robertson <> wrote:

> Kevin Moore wrote:
>> Ok the holidays are over, and I'm back to trying to get my Fluke hooked
>> to the computer so I can do scripts.
>> Problem I'm having is that when I enter the following Aux/if , Read , Yes
>> the fluke resets after 1-2 secs.
>> It will also do this with the serial port unplugged.
>> I'm wondering if the is a normal action, like the Fluke is looking for a
>> signal from the com port to wait, or if there is a problem with my
>> Thanks,
>> Kevin
> Try leaving a pod hooked up in Self-Test and leave it running for a while
> the machine should not reset...
> If it does then something may well be wrong with the 9010 and I would
> the power supply first - looking for failing caps is the first item on the
> check list.
> John :-#)#
> _______________________________________________
> Techtoolslist mailing list
> FTP site is:
> Archive site:
Techtoolslist mailing list
FTP site is:
Archive site:

I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 27020 of my spam emails to date.
Get the free SPAMfighter here:
The Professional version does not have this message
Techtoolslist mailing list
FTP site is:
Archive site:
Received on Mon Jan 4 15:23:09 2010

This archive was generated by hypermail 2.1.8 : Tue Jan 05 2010 - 03:50:00 EST