On Thu, 8 Jun 2000, Dave George wrote:
> Right now, my +12 is fine, dead on. The +5s are all way low; from
> .12-.26 Vdc. This seems like too much of a difference to have to
> adjust for. I wanted to check with you guys before I cranked it
> up. I've only got so much MagicSmoke, and I can't afford to lose any
> right now. =)
> LMK what you can, ASAP, as I am impatient as all getout. =)
>
If the 5V is good with no load, but sags to below 1V under load,
as you describe, you've probably got a bad device in the output stage
of the power supply. Check all your power transistors in the output
stage of your 5V supply.
Joe
---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Jun 09 07:48:51 2000
This archive was generated by hypermail 2.1.8 : Tue Dec 02 2003 - 17:28:57 EST