Re: Re[2]: Electrohome Vertical vs. Horizontal

Gyruss uses a vertically mounted monitor. When I replaced the monitor
in my Gyruss, I got a new one from Arcadeshop and mounted the new
monitor and chassis in the original vertical frame. There was a little
bit of drilling required, but the end result was a shiney new monitor
mounted perfectly. I even took video of the process for a "How-To"
video that I produced and never released. It wasn't that hard to do though.

-Al-

Kurt Mahan wrote:
> peter jones wrote:
>
>> -----Original Message-----
>> From: John Robertson <pinball@telus.net>
>> To: rasterlist@vectorlist.org
>> Date: Tue, 20 Nov 2007 15:47:21 -0800
>> Subject: Re: RASTER: Electrohome Vertical vs. Horizontal
>>
>>
>>> Well, yes, there is no difference. All they have done is turn the
>>> monitor sideways. The logic board sorts out the image orientation...
>>>
>>> John :-#)#
>>>
>>>
>> i'v never even seen a vertical one except in the manual,
>> all the vertical games i'v opened have simply had the horizontal chassis slotted on on it's side.
>>
>> that, or the tube is bolted to the cab and the pcb-frame has been screwed to the side of the cab.
>>
>>
> As I recall QBert uses a real vertical monitor. Also Toobin.
>
> --Kurt
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
>
>

-- 
=================================================
   Check out Pins and Vids, The Video Magazine
  at http://www.pinsandvids.com.  Volume 1 and
 2 are now available for just $7.00 each shipped!
 "Episode III, Revenge of the Myth" goes on sale
   September 29, 2007. All money goes to the
      Pinball Hall of Fame in Las Vegas!
=================================================
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com