Re: WTBorrow: Fluke 6809 pod

<x-flowed>
I sent Corey (I hope) a copy of my version 3.1 for the 9010, anyone else
need it? Perhaps we need a second support page (outside of spies) with
these files, I don't want to due to copyright issues, but a private spot?

John :-#)#

At 07:24 PM 8/9/00, Corey Stup wrote:
> > the same for example...I think a 6502/6800/6802/8 multipod may not be so
> > much trouble after all...anyone have lots of free time?
>Well, for the 6800/02/08, at least the code should be almost 100%
>compatable (or could be made to be) - a multi-pod with 6502 mode would
>have to switch out EPROM as well. Interesting side note, the 6802 pod
>has a 6532 for support.
>
> > Anyone have a 6802 pod and have the Pod Eprom stored? I have the 6502 data
> > if anyone wants it.
>I have a copy of the 6802 pod code, EPROM was labeled "V1.0". I
>certainly could share. Anyone have any newer s/w for the 9010A? Mine
>boots with a version code of "2B".
>
> To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the
> message body to: techtoolslist-request@flippers.com. Please direct other
> questions, comments, or problems to jrr@flippers.com.

  John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
  Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
  http://www.flippers.com
         "Old pinballers never die, they just flip out."

</x-flowed>
Received on Thu Aug 10 12:48:45 2000