RE: Fluke 9010A and Space Invaders

I've had similar problems on PCBs that run fine with a CPU. I think it may
have happened on my L-shaped SI.

As Martin said, I just disabled the UUT test and it worked fine.

Phil

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com]On Behalf Of Phil Morris
Sent: 13 April 2005 21:30
To: techtoolslist@lists7.flippers.com
Subject: [Techtoolslist] Fluke 9010A and Space Invaders

I have a Fluke 9010A with an 8080 pod - said combination works fine with
every '3-layer' Taito Space Invaders boardset that I've used it with, but
if I try it on *good, working* 'L-shaped' Taito boards I get the error:

UUT Power Fail

This has me puzzled - why should the Fluke work fine with one type of
boardset, yet not the L-shaped set, even though said L-shaped sets work
perfectly with an 8080 in the CPU socket?

Thanks,
Phil

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Wed Apr 13 14:34:25 2005