Did you check the power levels with the Fluke pod in? Seems like I heard
that it draws more power than the CPU. Also, maybe you have a weak component
in the CPU circuit, since adding the pod changes trace lengths, power
loading, etc. does it not?
-----Original Message-----
Okay, thanks for all the suggestions, now for an update ...........
As Alex said above, my power supply was indeed sagging somewhat as I just
upped the voltage and the Bus Test then passed okay. However ....... I
still can't run the board with the Fluke attached using Run UUT - all I get
Seeing that has reminded me to add that the CPU socket has recently been
replaced.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Fri Apr 15 10:18:26 2005
This archive was generated by hypermail 2.1.8 : Mon Sep 12 2005 - 19:58:50 EDT