RE: Unipak 2B adaptor query

I really depends on what it costs to run them. I didn't realize there
was a 068 also. Could probably do bare boards pretty inexpensively. I've
seen so many Unipak 2Bs with no card, that I was considering making
something
so they'd at least be useful.

 - Mike -

> -----Original Message-----
> From: techtoolslist-bounces@flippers.com
> [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Phil Morris
> Sent: Monday, May 30, 2005 4:04 PM
> To: Technical Tools Mail List
> Subject: RE: [Techtoolslist] Unipak 2B adaptor query
>
>
> >You mean a 351B-086 ?
>
> I think that's a separate adaptor, in the Unipak2B.txt file
> that I have it has the entry as:
>
> 351B068
>
> that's for the PROM I need to program, namely the 82S115
>
> BUT there's also a 351B086 listed for other chips.
>
> >I've been thinking about running some of these. The only
> problem would
> >be the plastic housing. All that is inside it is an
> 27HC299, a handful
> >of diodes, couple caps, 1 resistor and a 28 pin zif socket. Any
> >interest in these without the plastic housing?
>
> How much each? I'm only, at this moment, after the 068 version.
>
>
> Phil
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Mon May 30 18:33:33 2005