RE: The Age Old - "What Eprom Programmer should Iget"question

Looks like they have a few of these on Ebay.
http://cgi.ebay.com/Enhanced-Willem-EPROM-Programmer-USB-BIOS-PIC-FWH-ATMEL_
W0QQitemZ7558342918QQcategoryZ4661QQrdZ1QQcmdZViewItem

Irvine is only a couple of miles from me too. I guess for $38 I couldn't go
too wrong could I? Your experience has been pretty good with these despite
the super low price? Will I need to purchase separate adapters if I buy
this one?

Thanks!

Matt

  _____

From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Bill Karkula
Sent: Saturday, October 29, 2005 5:50 PM
To: Technical Tools Mail List
Subject: RE: [Techtoolslist] The Age Old - "What Eprom Programmer should
Iget"question

I kept my workhorse Data I/O and bought one of those enhanced Willem
programmers on ebay. Mine cost less than $70 when I bought it over a year
ago. Works great on those larger eproms - I only use the Willem when the
Data I/O is incapable of programming the device. I have an old 100Mhz
Pentium laptop connected to my data I/o and to the willem and between the
two programmers I am covered.

Best Regards,

Bill

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com]On Behalf Of Matt Rossiter
Sent: Saturday, October 29, 2005 7:43 PM
To: 'Technical Tools Mail List'
Subject: [Techtoolslist] The Age Old - "What Eprom Programmer should I
get"question

I've been happy with my Data I/O 29b programmer for a long time. I
especially like it because it does all the 82S proms that I need.

Lately I've had a number of people asking me to program some of the 27C4000
and 27C010 series eproms. I don't have the pinout cartridge to do those and
I'm not sure if I feel like hunting one down.

Even though I fix games on the side for fun and a little side cash, I'd like
to get a nice eprom programmer (to program the newer, bigger eproms) - but
not pay $Big Bucks$ for one.

I don't want to spend much more than $350 for one so I was thinking of maybe
the Needhams EMP-11 http://www.needhams.com/products-emp11.html or maybe
something that uses USB instead of parallel.

What do you guys recommend?

Thanks

Matt

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sat Oct 29 21:10:18 2005