RE: Cross to read a PROM?

From: Phil Morris <arcaderelics_at_irongiant.org.uk>
Date: Sun Feb 19 2006 - 08:49:16 EST

>Thanks for the couple of suggestions. I should have been more clear on my
>original question. I'm just trying to read the PROM (it is a PROM isn't
>it?) to verify against the MAME set that it's not corrupted. I'm using an
>EETools Top Max which is a pretty good device (although it can't do the
>2708's). In the past, Al Kossow's original PROM cross reference (now hosted
>on a few sites, but I usually pull it from mikesarcade.com) has always been
>able to stear me to a substitue PROM to be able to read it, but this one
>isn't listed.

I know what you mean - I made my own enquiries into this in the hope that
my Data I/O 29B would handle it, trouble is that it won't even read the
82S153 without the UniPak. :(

Unless anyone here knows differently?

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Sun Feb 19 08:47:17 2006

This archive was generated by hypermail 2.1.8 : Sun Feb 19 2006 - 09:50:01 EST